VOxEU: Coronabonds - The forgotten history of European Community debt

The introduction of European Coronabonds is sometimes described as an unprecedented step that would create a dangerous precedent of debt mutualisation. This column shows that this view is wrong and ignores the history of European financial cooperation, writes Sebastian Horn, Josefin Meyer and Christoph Trebesch for VoxEU

Opinions
20 April 2020
france_covid_ed_only.jpg

The proper European response to the coronavirus crisis is intensely debated at the moment, with European Stability Mechanism (ESM) loans and Coronabonds being the most prominent alternatives (e.g. Bénassy-Quéré 2020a, Bénassy-Quéré 2020b, Bofinger et al. 2020, Erce et al. 2020, Grund et al. 2020). One of the arguments against Coronabonds – a one-off mutual European bond issuance – is that this would be an unprecedented step and break a dangerous taboo.

This column adds to the debate by showing that that bonds issued and guaranteed jointly by European states are not a novel instrument but have repeatedly been issued since the 1970s. We summarise the forgotten history of European Community bonds and the reliance on European joint debt issuances in fighting deep economic crises in Horn et al. (2020a). It is not widely known that prior to the instruments created during the euro crisis, such as the ESM, Europe relied on a range of earlier crisis-response instruments and cooperation mechanisms, as we document in an ongoing research project on international official lending (Horn et al. 2020b).

The oil crisis and the Community Loan Mechanism of 1975

One of these little-known instruments is the European Community bond, which was triggered by the 1973 oil crisis (James 2012). The oil crisis was a deep shock to the European states, both economically and politically, and was perceived as an existential threat to the economic union (Diekmann 1990). Italy was particularly hard-hit and entered a deep recession, with a GDP growth rate of -2% in 1975.

In response to the crisis, the so-called Community Loan Mechanism (CLM) was implemented in February 1975 with the goal of issuing European Community bonds on private capital markets to support countries in crisis. The German government was a pivotal player in creating this mechanism and also added a bilateral $2 billion loan granted to Italy in 1974.

The program complemented the European Medium-Term Financial Assistance Facility (MTFA), which had been created in 1971 and enabled the provision of direct financial aid through intergovernmental loans, without placing community loans on the private market. The main goal of these programs was to cushion balance of payments difficulties caused by external shocks via intra-European financial cooperation and to provide aid to crisis-hit countries in Europe in order to limit their dependency on loans from the IMF and the US Federal Reserve (Kruse 1980).

Figure 1 Design of the Community Loan Mechanism of 1975

 - Source: Source: EEC Council (1975a), EEC Council (1975b), own illustration.
Source: Source: EEC Council (1975a), EEC Council (1975b), own illustration.

The basic design of the Community Loan Mechanism was as follows: The European Commission would raise community loans on behalf of the European Community. The Council of Ministers, which represents the governments of the member states, made all relevant decisions, while the Commission acted as the executive body. To raise funds, the Commission negotiated with private investors and presented the results to the Council of Ministers. The loans were then transferred to the crisis-hit countries' central banks via the Bank for International Settlements (BIS), which acted as an agent. Figure 1 summarises the design graphically.

As for the liability structure, the Commission guaranteed the repayment to the private creditors by means of its budget. In addition, the mechanism included a guarantee commitment from the member states, according to fixed quotas. The maximum credit volume was set at $3 billion in 1974 and the guarantee increased to a maximum of 200% of this credit limit. The twofold guarantee of 200% was intended as a buffer against payment problems by one of the guaranteeing member states. For example, under the program, Germany had an initial guarantee share of 22% and thus assumed a maximum guarantee of 44%, or $1.32 billion in total (Stieber 2015). The volume of the program was considered to be extensive at the time and, in the case of Italy, exceeded the financial resources provided by the IMF.

A survey of European Community loans and their recipients

In 1976, the first European Community bond was placed on private capital markets, with funds lent to Italy and Ireland. Further community bonds were distributed to Italy (1977), France (1983), Greece (1985) and Portugal (1987). In the 1990s, community bonds were issued in favour of Greece (1991) and Italy (1993). The mechanism was merged into the EU Balance-of-Payments Facility in 1988 and, in 2002, was restricted to countries outside of the euro area. It was again activated in 2008/2009 to support Hungary, Latvia, and Romania. In addition, the European Financial Stability Facility (EFSF) and ESM were created after 2010 to support euro area members.

Table 2 provides an overview of the European Community loans by year and recipient country. The EFSF and ESM loans granted to Cyprus, Greece, Ireland, Portugal, and Spain during the 2010-2013 crisis are not listed, since they are much better known and well-documented (for details see Corsetti et al. 2017).

The table presents a summary of the European Community’s borrowing programs financed by community bonds. In columns 4 and 5, the authorised loan amount is scaled by the GDP and foreign reserves of the year prior to the crisis. CLM: Community Loan Mechanism, MTFA: Medium-Term Financial Assistance Facility, BoPF: Balance-of-Payments Facility. - Source: Source: Horn et al. (2020b)
The table presents a summary of the European Community’s borrowing programs financed by community bonds. In columns 4 and 5, the authorised loan amount is scaled by the GDP and foreign reserves of the year prior to the crisis. CLM: Community Loan Mechanism, MTFA: Medium-Term Financial Assistance Facility, BoPF: Balance-of-Payments Facility.
Source: Source: Horn et al. (2020b)

Lessons for today

How strong are the parallels to today? Most current Coronabond or Eurobond proposals imply joint and several liability by all member states. This would go a step further compared to the Community Loan Mechanism of the 1970s, which involved country guarantees with maximum quotas. Nevertheless, there are important lessons to be learnt from our review of European lending practices since the 1970s.

One important insight is that, now and then, the EU budget played a central role in the European bond guarantee schemes. Direct guarantees by member states only served as a second guarantee tier, which would be activated if EU funds would not suffice (CLM rules until 1981). It is therefore no surprise that current proposals also suggest using an (enlarged) future EU budget to guarantee the repayment of potential Coronabonds.

Second, history leaves some ground for optimism: The European Community bonds we surveyed were all repaid in full and on time and the guarantees were never activated.

The third and most important lesson is the bigger picture: During deep crises the European governments have repeatedly shown willingness to extend rescue funds along with substantial guarantees to other members in need. The necessary institutional arrangements were often set up flexibly and quickly. Coronabonds would thus stand in a long tradition of European financial cooperation and solidarity.

The original article first appeared on VoxEU here.


Disclaimer

"THINK Outside" is a collection of specially commissioned content from third-party sources, such as economic think-tanks and academic institutions, that ING deems reliable and from non-research departments within ING. ING Bank N.V. ("ING") uses these sources to expand the range of opinions you can find on the THINK website. Some of these sources are not the property of or managed by ING, and therefore ING cannot always guarantee the correctness, completeness, actuality and quality of such sources, nor the availability at any given time of the data and information provided, and ING cannot accept any liability in this respect, insofar as this is permissible pursuant to the applicable laws and regulations.

This publication does not necessarily reflect the ING house view. This publication has been prepared solely for information purposes without regard to any particular user's investment objectives, financial situation, or means. The information in the publication is not an investment recommendation and it is not investment, legal or tax advice or an offer or solicitation to purchase or sell any financial instrument. Reasonable care has been taken to ensure that this publication is not untrue or misleading when published, but ING does not represent that it is accurate or complete. ING does not accept any liability for any direct, indirect or consequential loss arising from any use of this publication. Unless otherwise stated, any views, forecasts, or estimates are solely those of the author(s), as of the date of the publication and are subject to change without notice.

The distribution of this publication may be restricted by law or regulation in different jurisdictions and persons into whose possession this publication comes should inform themselves about, and observe, such restrictions.

Copyright and database rights protection exists in this report and it may not be reproduced, distributed or published by any person for any purpose without the prior express consent of ING. All rights are reserved.

ING Bank N.V. is authorised by the Dutch Central Bank and supervised by the European Central Bank (ECB), the Dutch Central Bank (DNB) and the Dutch Authority for the Financial Markets (AFM). ING Bank N.V. is incorporated in the Netherlands (Trade Register no. 33031431 Amsterdam).